EL5030L
Hybrid based Networked Access System
EL5030L is an all new powerful hybrid based networked access controller designed to give the user the most flexible and cost effective access control design to meet any building requirement. It can operate in a fully centralized topology, field design topology or hybrid type topology making it the most desirable controller to use and specify.
Replaces the standard EL5030 firmware with a firmware dedicated to lift control
Supports up to 8 EFD32s
Maximum of 64 Floors
Configurable to work on 3 or 5 or 8 access portals
Card database upgradable to an astonishing 300,000 card users
Reader support: Magnetic, Bar Code, EM/HID Proximity, Mifare, Biometric Devices
32-bit-low-power and high performance microprocessor
Peer-to-peer communication with other EL 5000 series controller for data sharing intelligence
Multi-function; Standard Access Mode/Car-Park control/Time clocking –Late reasoning mode
Enhanced Anti-passback capabilities ( Hard/Soft/Alarm)
Support an expansion slot for future-proof requirements
40 holidays set; 99 timezones with 99 timers with 4 time intervals
Built in tamper alarm, battery low, AC fail
Product Code: EL5030L Hybrid based Networked Access System
Model | EL5030L |
Manufacturer | ELID Sdn Bhd |
Country of Origin | Malaysia |
Microprocessor | 32-bit 386EX running at 25 MHz |
Card Users | 12000 |
Transaction | 25000 |
Memory | 2MB RAM |
Access Modes | Card |
Standalone Operation | Yes |
Real-Time Scanning |
Yes |
Tamper Detection |
Yes |
Display |
2×16 Character |
Connectivity |
TCP / IP, RS485 |
No of RS485 BUS |
1 (2 with EB2) |
Access Applications |
Lift Access |
Max. Lifts Supported |
4 Lifts |
Type of Readers Supported |
Barcode, Magnetic, Proximity, Smart Cards, Biometrics, Touch Memory |
Max. Readers Supported |
8 (4 IN and 4 OUT Readers) |
Max. RIU Supported |
4 units of ER502 or 2 units of ER505 |
Max. EFD Supported |
8 units of EFD32 or EFD80 (with EB2) |
Operating Temperature |
0oC to 60oC |
Humidity |
10% to 90% non-condensing |
Power Requirements |
12VDC with 1.5 Amp Charger |
Access Applications |
Door, Car Park Access, Time Clocking |
Casing Dimensions |
410 (H) x 400 (L) x 120 (W) mm |
Approximate Weight |
5kg with Casing and Power Supply |
Approximate Weight |
600gm without Casing and Power Supply |